• Expand and control more appliances remotely
• Easy to install
• Compatible with existing Nexa products.

With an additional remote-controlled electrical outlet, you can expand your existing Nexa remote switch set. The remote switch is compatible with all Nexa remote controls and is ideal for use when you want to remotely control multiple lights and appliances that are often switched on and off manually.

Easy to install

The remote switch is easy to install using your existing remote control. Have the remote control ready and insert the plug into the wall socket. Hold down one of the channels on the remote control within 6 seconds of inserting the plug. The plug will confirm by "clicking" twice. The installation is now complete and you can control the remote switch with the remote control.

Up to 30 metres range

Once the remote switch is installed, you can plug a lamp, coffee maker or other appliance into the socket and control it remotely with your remote control. The range between your remote control and the socket is up to 30 metres and usually works wherever you are in your home.

Plug in a extension cable and control more appliances

You can also plug an extension cable into the socket to control multiple appliances and lights at the same time (as long as you don't exceed a total of 2300W).

Backwards compatible products from Nexa

The remote switch is compatible with Nexa Bridge X and Smart Hub. All Nexa sockets and remote controls are backwards compatible and work with already installed Nexa systems.

Specifications

Remote control not included.
For indoor use only.
Not dimmer compatible.

Length: 7 cm, (sticking out 3.5 cm from the wall)
Diameter: 4.8 cm
Weight: 60 grams

Max load: 2300W
Power source: 220-240V ~50 Hz
Power consumption: 0.2W (standby)

Radio frequency 433.92 MHz
Minimum distance between two electrical outlets: 50 cm
Max range: 30 metres
The outlet can be controlled by a maximum of 32 different remote controls.