Repair Sealant, Casco RubberFix

Repairs and seals clothes and gadgets

Save

In stock

12.90 €

Product info
Specifications
About the innovator
FAQ

Water resistant - perfect for rainwear
Free from solvents
Easy to work with

Worn soles or holes in your rain jacket? Casco Rubberfix repair sealant is ideal for bonding, filling and sealing rubber, leather, textiles, neoprene, various synthetic materials and all water-resistant garments in the home. The sealant is also solvent-free and temperature-resistant between -40°C and +120°C.
Repair sealant for all materials
Casco Rubberfix is a versatile repair sealant that works on all kinds of materials. Whether you need to repair soles and heels, rainwear, rucksacks, rubber boots, wetsuits or suitcases, Casco Rubberfix is the repair compound that extends the life of all your wardrobe items.
Water-resistant repair
Due to its water-resistant properties, Casco Rubberfix is particularly suitable for resisting rain, puddles and moisture. However, please note that it is not suitable for PP and PE plastics.
Drying and curing time
Drying takes only 10-30 minutes, and after about 48 hours your repair is cured and ready to be used again. Please note that the curing time may vary depending on the surface, humidity level and ambient temperature, among other factors. The repair sealant provides a transparent adhesive joint.
Things to consider
Do not use Casco Rubberfix at temperatures below +5°C or at extremely low relative humidity (once hardened, it is temperature resistant between -40°C to +120°C). Remember that the surface being repaired needs to be clean, dry and free of grease.
How to do it
Repair can be done from both the inside and outside. Roughen the material with the abrasive paper provided. Cover the surface (at least 2 mm) and spread the paste. To repair shoes/rubber boots: cover the surface with a thin layer (max. 1 mm) and press a polyester patch (minimum width 2.5 cm) into the paste using the spatula. Spread the paste on both the piece of polyester and the area around it. Immediately remove any stains with acetone.
Specifications
Volume: 50 ml
Drying time: 10-30 minutes
Curing time: Approx. 48 h
Not suitable for use on PP and PE plastics
Article nr: lima-185065

Stock availability: 297

Other: Drying time: About 48h , Not suitable for use on PP and PE plastics , Time to harden: 10-30 minutes

PDF: Safety data sheet

Volume: 50 ml